INDELFA vof
Crombacherstraat 18
NL- 6465·AH Kerkrade

Tel. +31 45.5411949
Fax. +31 45.5426399
Mail:
mail@indelfa.co.uk

Deutsch

English

France

Nederlands

Safety & Proceedings AUTO TARGET® FREQUECY CONTROLLER

Home

P 22

AT 100

Duell

MT

clients

Images

Video

Fair

AT100 Home

Mechanics

Do It Yourself

Controller

Attitudes

ilink

CAUTION ! Potentiometers operate at impressed voltage; handle during dead voltage or with isolated tools

Safety & Proceedings AUTO TARGET® FREQUECY CONTROLLER

CAUTION ! Potentiometers operate at impressed voltage; handle during dead voltage or with isolated tools Only

Only after activating reset / end switch the motor runs at high speed.

Only after activating reset / end switch the motor runs at high speed.
After connecting voltage; the motor will transport the card carrier at low speed

This will also take place after a short voltage break. !
Only after the card carrier activates the reset / end switch
the motor also runs at high speed.


Standard adjustment off factory is . .

Range of low speed is adjustable by potentiometer“LOW SPEED”.
Standard adjustment off factory is “12 o’clock” / middle.
Lowering SPEED is turning to 11 o' clock, anti clockwise.
Range of high speed is not adjustable.

Acceleration / breaking speed is adjustable by potentiometer “SLOPE “
Standard adjustment off factory is “11 o’clock” .
Turning the potentiometer to “10 o’clock” = slow down more quickly,
The best calibration is when the low speed is visible 50cm before MARK.
Auto Target starts to slow down 3.50m before MARK.

The torque moment of the motor is kept steady. The controller is leaving our factory with an optimum adjustment of the “TORQUE “ and should not be changed.

It can be adjusted by potentiometer “TORQUE “ but: to avoid damage to the controller “TORQUE “ is only to be changed when necessary.

Practicable examples

To change the basic setting of the “TORQUE “ moment start with an warmed up controller (+/- half an hour).
NOTE: Potentiometer “TORQUE” turning forward (clockwise) is “LESS” = from 12 to 1 o’clock !

Turning forward the “TORQUE” potentiometer until the motor stops running
- keep card carrier away from the reset switch
- carefully turn the potentiometer to MORE, - NOTE: increase is anti clockwise
- you will feel that the card carrier pushes back more powerful
- minimize the power to as much as necessary for good transportation
LED light "TORQUE CONTROL" illuminates when the torque moment is activated.

Under voltage protector is released at < 170 Volt.
Over voltage protector activates at approx. 4 Ampere.
LED light "AUTO FUSE" discharges in case one of the safeties is activated.Automatic restart after approx. 0,3 Sec.

head.jpg

SEARCH: Worldwide United Kingdom  

[@Home WebSpace]

(C) indelfa Fri, Mar 30, 2007

















































































+